Remote Control Duplicator
Remote Control Duplicator
Remote Control Duplicator
Remote Control Duplicator
Remote Control Duplicator
Remote Control Duplicator
Remote Control Duplicator
Remote Control Duplicator

Remote Control Duplicator

Regular price $13.97
Unit price  per 

The easiest way to copy any wireless remote, car key, garage door opener, and more! Remote Control Duplicator.


  • For house safety and convenience. It’s always helpful and wise to have duplicate remotes and keys available. When the time comes when we misplace or lost keys, you’ll always have a spare.
  • Duplicate all your keys. This tool allows you to easily copy keys within minutes. Duplicate your existing remote control for cars, sunroofs, garage doors, rolling gates, heating systems, and many more!
    • One-to-one key technology. Features an innovative one-to-one key copying technology, for copying any compatible wireless remote keys. The password of each key is saved individually for your convenience.
    • Easy to use. Place the remotes side by side (as close as possible), then press the key of your old remote and the to-be-matched key remote simultaneously. The LED indicator will flash about three times, followed by a continuous fast blinking. Done!
    • Easy to clear codes. Long press the upper two (A & B) buttons to clear old codes (The LED indicator will flash three times, followed by a continuous fast blinking, which is the sign of a cleared state).


    Step 1 – Clear the Memory

    • Hold A and B buttons together - LED will flash 3x times
    • Keep holding down the A button and release the B button
    • Keep holding the A button and push the B button 3x times, LED will start flashing
    • Now press any key on the remote control, LED lights are not bright, so delete code is a success; if you press the button LED lamp is lit, indicating that the original code is not deleted!

    Step 2 - Copy Your Remote Control

    • Put both remotes next to each other (touching). Make sure they have direct contact.
    • Hold 1 button on your original remote and 1 button on your clone remote.
    • Keep holding until the LED light blinks twice then blinks twice again then goes steady. This means the cloning has been successful.
    • If for some reason the clone does not go further than 2 blinks, it means the signal did not go through, please shift the remote slowly up and down until you get to the point where it will go through.


    • Material: Abs + Electronic Components
    • Compatible Chips: 2262, 2260, 5026, 5326, 5326 - 3, 5326 - 4, Fp527, Pt2240, Ev1527, Ht6010, Ht6014, Ht12e, Ht640, Ht680, Plc168, Smc Series, 9xx, Pt2292, 12l - 4sc, Ht6026, Um3750am, Etc.
    • Compatible Crystal Frequency: 315mhz / 433mhz
    • Powered By: 1 X 27a Battery ( Included )



      • 1 x User manual
      • 1 x Remote Control Duplicator (Battery included)

      Please be expected 2-4 weeks shipping delay due to High Volume of Order